Shotgun
AlterationsShotgun
Alterations
| Install Choke tube on Single Barrel 12/20ga | $79.50 |
| Install Choke Tube on Single Barrel 10ga | $99.50 |
| ..................chrome bore add | $20.00 |
| Spare choke tubes 12/20 | $17.99 |
| Spare choke tubes 10ga | $24.99 |
| Choke tube wrench | $7.99 |
| Double Barrel installation (includes 5 tubes) | $399.00 |
| Lengthen Forcing Cone | $45.00 |
| Open Choke Constriction (per barrel) | $45.00 |
| If barrel has chrome bore, add to above (2) items | $25.00 |
| Remove Stuck choke tube (usually ruins choke tube) | $20.00-$40.00 |
|
*Re-Chamber to 3" and Test-Fire |
$40.00 |
| Disassemble, clean and adjust pumps and automatics | $40.00 |
| Disassemble, clean and test Double Barrels | $80.00-$100.00 |
| *Install ventilated rib | P.O.R. |
| * Resolder ribs on double barrels
(please read note below) |
Price on application |
| Cut/Crown Single Barrel and re-install bead | $50.00 |
| Cut/Crown Double Barrel and re-install bead | $80.00 |
| Install shotgun bead (price on bead extra) | $15.00 |
| Remove stuck bead | $10.00-$20.00 |
| Convert older Winchester model 12 to handle 2 3/4" shells | $75.00 |
| Convert pre-war Browning 16 ga. autos to handle 2 3/4" shells | $90.00 |
| Convert pre-war Browning autos to crossbolt safety | P.O.R. |
| Covert older Browning autos to new "Speed load" system | P.O.R. |
| Convert barrel to "Deerslayer" or "Buck Special" | $60.00 plus sights |
| Re-install broken Slug Sight | $40.00 |
| Remove dents (at customer's risk) | $40.00-$60.00 |
| Straighten Barrel | $40.00-$60.00 |
| Adjust trigger pull to customer's specifications | $45.00-$55.00 |
| Install left hand safety (most models) (price of safety extra) | $25.00 and up |
| Install Edwards recoil reducer (labor only) | $45.00 |
| Install Benelli Reducer | $10.00 |
| Benelli Reducer | $49.00 |
| Nova Mounting Bracket | $20.00 |
| Edwards Reducer | $45.00 |
| C&H Mercury Reducer | $45.00 |
| Jewel (engine turn) bolt and carrier on most shotguns | $45.00 |
| Gold plate trigger on most shotguns | $45.00 |
| Gold fill receiver engraving on most shotguns with engraving | $40.00 |
| Pattern Shotgun | $30.00 |
| Convert Remington 870 to 3" magnum | $65.00 |
| Install Ahlman's cantilever mount on plain barrel | $150.00 (includes parts) |
| Remove old sights if necessary | $15.00 |
| Drill/Tap/Install Base on Receiver | $45.00 |
| Install Saddle Mount and Scope | $25.00 |
| Custom Mounts for LH Dominant Eye | P.O.R. |
| Mount Scope/Bore-Site on existing base | $20.00 |
| Cowboy Action Job--Win 97's | $100.00 |
| Cowboy Action Jobs--Doubles | $80.00 |
| REMINGTON 1100/ 1187 WORK | |
| Re-solder original magazine tube | $80.00 |
| Fit/Solder new Mag. tube | $110.00(tube extra) |
| Solder in new Int. Latch Stud | $60.00 |
| Remove damaged int. latch stud | $25.00 |
| Solder new barrel guide stud | $60.00(stud extra) |
| Solder action spring tube | $50.00 |
| Re-solder loose barrel support | $35.00 |
| Fit/ Solder new barrel support | $60.00(support extra) |
| Above services include touch-up bluing only----Hot bluing is extra. | |
| Install Standard Buttpad | $45.00 |
| Curved or Notched Buttplate | $75.00-$125.00 |
| Fit 1/4" Spacers (per spacer) | $10.00 |
| Fit 1/4 Spacers (per spacer) No Pad work | $40.00 |
| Benelli "Step Plate" | $29.95 |
| Adjust Pitch and Re-fit Pad | $75.00-$100.00 |
| Install Gracoil Plate and Pad | $200.00 |
| Gracoil Plate Std. | $165.00 |
| Gracoil Plate LP Style | $215.00 |
| Install "Adjust-A-Plate" | $80.00 |
| Adjust-A-Plate | $45.00 |
| Pachmayr Decelerator Pad | $37.99 |
| Hi-Viz X-Coil Pad | $39.99 |
*On alterations proceeded with an (*) write us first and describe your gun completely.
Handgun Work - Rifle Work - Shotgun Alterations - Stock Work - Stock Refinishing - Adjustable Comb - Custom Rifle Barrels - Muzzle Brakes - Checkering - Porting - Rebluing - Engraving
Home - Directions - Telephone - Shipping - Gunsmithing - Gun Parts - Rifle Range