Rifle Work

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil and inspect bolt actions .....$45.00

Clean, oil and inspect levers, pumps, autos.....$55.00--75.00

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per bolt)......$95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75.00

Drill/tap for scope mounts (mount extra).....$65.00

Drill/tap receiver for peep sight (sight extra).....$50.00

Drill/tap for side mounts (mount extra)........$75.00

Drill/tap "hard" receivers for scope mount (military)....$75.00

Drill/tap make custom "weaver-style" mount (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top.....$40.00

Fluting barrel (full length) .....$200.00

Fluting barrel, diamond or spiral.....$250.00

Glass bed action & free float barrel on bolt action rifle.....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55.00

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only).....$50.00

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN contour.....$45.00

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load” System.....$40.00

Pillar type glass bedding, free-float action (using aluminum pillars, not epoxy).....$175.00

Porting barrel on magnum rifles.....$135.00

Rebarreling...Price On Request Custom Rifle Barrel Page

Re-line 22LR barrels (liner extra).....$175.00-$200.00

Re-line centerfire barrels (liner extra) (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style (parts extra).....$95.00

Rem. 700 BDL to detachable magazine style (parts extra).....$65.00

Rem. 742 conversion to pump action (includes exchange of parts, converts butt stock and forearm to black synthetic).....$289.00

     742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld-on new,improved style) MUST SEND COMPLETE GUN!.....$175.00

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers and tune.....$55.00

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need complete gun).....$120.00

Suppressor install on AR-15 type gun (need barrel only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only).....$45.00-$75.00

Trigger job, 3-4 #.........$60.00

 

 

 

Additional Gunsmith Services

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil and inspect bolt actions .....$45.00

Clean, oil and inspect levers, pumps, autos.....$55.00--75.00

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per bolt)......$95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75.00

Drill/tap for scope mounts (mount extra).....$65.00

Drill/tap receiver for peep sight (sight extra).....$50.00

Drill/tap for side mounts (mount extra)........$75.00

Drill/tap "hard" receivers for scope mount (military)....$75.00

Drill/tap make custom "weaver-style" mount (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top.....$40.00

Fluting barrel (full length) .....$200.00

Fluting barrel, diamond or spiral.....$250.00

Glass bed action & free float barrel on bolt action rifle.....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55.00

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only).....$50.00

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN contour.....$45.00

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load” System.....$40.00

Pillar type glass bedding, free-float action (using aluminum pillars, not epoxy).....$175.00

Porting barrel on magnum rifles.....$135.00

Rebarreling...Price On Request Custom Rifle Barrel Page

Re-line 22LR barrels (liner extra).....$175.00-$200.00

Re-line centerfire barrels (liner extra) (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style (parts extra).....$95.00

Rem. 700 BDL to detachable magazine style (parts extra).....$65.00

Rem. 742 conversion to pump action (includes exchange of parts, converts butt stock and forearm to black synthetic).....$289.00  742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld-on new,improved style) MUST SEND COMPLETE GUN!.....$175.00

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers and tune.....$55.00

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need complete gun).....$120.00

Suppressor install on AR-15 type gun (need barrel only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only).....$45.00-$75.00

Trigger job, 3-4 #.........$60.00

 

Additional Gunsmith Services

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil and inspect bolt actions .....$45.00

Clean, oil and inspect levers, pumps, autos.....$55.00--75.00

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per bolt)......$95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75.00

Drill/tap for scope mounts (mount extra).....$65.00

Drill/tap receiver for peep sight (sight extra).....$50.00

Drill/tap for side mounts (mount extra)........$75.00

Drill/tap "hard" receivers for scope mount (military)....$75.00

Drill/tap make custom "weaver-style" mount (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top.....$40.00

Fluting barrel (full length) .....$200.00

Fluting barrel, diamond or spiral.....$250.00

Glass bed action & free float barrel on bolt action rifle.....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55.00

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only).....$50.00

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN contour.....$45.00

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load” System.....$40.00

Pillar type glass bedding, free-float action (using aluminum pillars, not epoxy).....$175.00

Porting barrel on magnum rifles.....$135.00

Rebarreling...Price On Request Custom Rifle Barrel Page

Re-line 22LR barrels (liner extra).....$175.00-$200.00

Re-line centerfire barrels (liner extra) (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style (parts extra).....$95.00

Rem. 700 BDL to detachable magazine style (parts extra).....$65.00

Rem. 742 conversion to pump action (includes exchange of parts, converts butt stock and forearm to

     black synthetic).....$289.00  742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld-on new,improved style) MUST SEND COMPLETE GUN!.....$175.00

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers and tune.....$55.00

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need complete gun).....$120.00

Suppressor install on AR-15 type gun (need barrel only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only).....$45.00-$75.00

Trigger job, 3-4 #.........$60.00

 

Additional Gunsmith Services

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil and inspect bolt actions .....$45.00

Clean, oil and inspect levers, pumps, autos.....$55.00--75.00

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per bolt)......$95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75.00

Drill/tap for scope mounts (mount extra).....$65.00

Drill/tap receiver for peep sight (sight extra).....$50.00

Drill/tap for side mounts (mount extra)........$75.00

Drill/tap "hard" receivers for scope mount (military)....$75.00

Drill/tap make custom "weaver-style" mount (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top.....$40.00

Fluting barrel (full length) .....$175.00

Glass bed action & free float barrel on bolt action rifle.....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55.00

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only).....$50.00

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN contour.....$45.00

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load” System.....$40.00

Pillar type glass bedding, free-float action (using aluminum pillars, not epoxy).....$175.00

Porting barrel on magnum rifles.....$135.00

Rebarreling...Price On Request Custom Rifle Barrel Page

Re-line 22LR barrels (liner extra).....$175.00-$200.00

Re-line centerfire barrels (liner extra) (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style (parts extra).....$95.00

Rem. 700 BDL to detachable magazine style (parts extra).....$65.00

Rem. 742 conversion to pump action (includes exchange of parts, converts butt stock and forearm

     to black synthetic).....$289.00  742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld-on new,improved style) MUST SEND COMPLETE GUN!.....$175.00

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers and tune.....$55.00

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need complete gun).....$120.00

Suppressor install on AR-15 type gun (need barrel only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only).....$45.00-$75.00

Trigger job, 3-4 #.........$60.00

 

Additional Gunsmith Services

Additional Gunsmith Services

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil and inspect bolt actions .....$45.00

Clean, oil and inspect levers, pumps, autos.....$55.00--75.00

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per bolt)......$95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75.00

Drill/tap for scope mounts (mount extra).....$65.00

Drill/tap receiver for peep sight (sight extra).....$50.00

Drill/tap for side mounts (mount extra)........$75.00

Drill/tap "hard" receivers for scope mount (military)....$75.00

Drill/tap make custom "weaver-style" mount (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top.....$40.00

Fluting barrel (full length) .....$200.00

Fluting barrel, diamond or spiral.....$250.00

Glass bed action & free float barrel on bolt action rifle.....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55.00

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only).....$50.00

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN contour.....$45.00

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load” System.....$40.00

Pillar type glass bedding, free-float action (using aluminum pillars, not epoxy).....$175.00

Porting barrel on magnum rifles.....$135.00

Rebarreling...Price On Request Custom Rifle Barrel Page

Re-line 22LR barrels (liner extra).....$175.00-$200.00

Re-line centerfire barrels (liner extra) (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style (parts extra).....$95.00

Rem. 700 BDL to detachable magazine style (parts extra).....$65.00

Rem. 742 conversion to pump action (includes exchange of parts, converts butt stock and

     forearm to black synthetic).....$289.00  742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld on new,improved style) MUST SEND COMPLETE GUN! $175

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers and tune.....$55.00

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need complete gun).....$120.00

Suppressor install on AR-15 type gun (need barrel only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only).....$45.00-$75.00

Trigger job, 3-4 #.........$60.00

 

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil and inspect bolt actions .....$45.00

Clean, oil and inspect levers, pumps, autos.....$55.00--75.00

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per bolt)......$95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75.00

Drill/tap for scope mounts (mount extra).....$65.00

Drill/tap receiver for peep sight (sight extra).....$50.00

Drill/tap for side mounts (mount extra)........$75.00

Drill/tap "hard" receivers for scope mount (military)....$75.00

Drill/tap make custom "weaver-style" mount (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top.....$40.00

Fluting barrel (full length) .....$200.00

Fluting barrel, diamond or spiral.....$250.00

Glass bed action & free float barrel on bolt action rifle.....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55.00

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only).....$50.00

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN contour.....$45.00

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load” System.....$40.00

Pillar type glass bedding, free-float action (using aluminum pillars, not epoxy)..$175

Porting barrel on magnum rifles.....$135.00

Rebarreling...Price On Request Custom Rifle Barrel Page

Re-line 22LR barrels (liner extra).....$175.00-$200.00

Re-line centerfire barrels (liner extra) (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style (parts extra).....$95.00

Rem. 700 BDL to detachable magazine style (parts extra).....$65.00

Rem. 742 conversion to pump action (includes exchange of parts, converts butt

     stock and forearm to black synthetic).....$289.00

     742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld-on new,improved style) MUST SEND COMPLETE

     GUN!.....$175.00

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers and tune.....$55.00

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need complete gun).....$120.00

Suppressor install on AR-15 type gun (need barrel only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only).....$45.00-$75.00

Trigger job, 3-4 #.........$60.00

 

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil and inspect bolt actions .....$45.00

Clean, oil and inspect levers, pumps, autos.....$55.00--75.00

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per bolt)......$95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75.00

Drill/tap for scope mounts (mount extra).....$65.00

Drill/tap receiver for peep sight (sight extra).....$50.00

Drill/tap for side mounts (mount extra)........$75.00

Drill/tap "hard" receivers for scope mount (military)....$75.00

Drill/tap make custom "weaver-style" mount (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top.....$40.00

Fluting barrel (full length) .....$200.00

Fluting barrel, diamond or spiral.....$250.00

Glass bed action & free float barrel on bolt action rifle.....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55.00

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only).....$50.00

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN contour.....$45.00

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load” System.....$40.00

Pillar type glass bedding, free-float action (using aluminum pillars, not epoxy).....$175.00

Porting barrel on magnum rifles.....$135.00

Rebarreling...Price On Request Custom Rifle Barrel Page

Re-line 22LR barrels (liner extra).....$175.00-$200.00

Re-line centerfire barrels (liner extra) (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style (parts extra).....$95.00

Rem. 700 BDL to detachable magazine style (parts extra).....$65.00

Rem. 742 conversion to pump action (includes exchange of parts,

     converts butt stock and forearm to black synthetic).....$289.00

     742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld-on new,improved style) MUST SEND COMPLETE GUN!.....$175.00

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers and tune.....$55.00

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need complete gun).....$120.00

Suppressor install on AR-15 type gun (need barrel only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only).....$45.00-$75.00

Trigger job, 3-4 #.........$60.00

 

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil , inspect bolt actions .....$45.00

Clean, oil , inspect levers, pumps, autos..$55-75

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per bolt)......

     $95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75.00

Drill/tap for scope mounts (mount extra)..$65.00

Drill/tap receiver for peep sight (sight extra)..$50

Drill/tap for side mounts (mount extra)....$75.00

Drill/tap "hard" receivers for scope mount

      (military)....$75.00

Drill/tap make custom "weaver-style" mount

     (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver

      top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top...$40.00

Fluting barrel (full length) .....$200.00

Fluting barrel, diamond or spiral.....$250.00

Glass bed action & free float barrel on bolt action

     rifle.....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55.00

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only)...$50.00

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN contour.$45

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load”

     system.....$40.00

Pillar type glass bedding, free-float action (using

     aluminum pillars, not epoxy).....$175.00

Porting barrel on magnum rifles.....$135.00

Rebarreling..Price On Request Custom Barrel Page

Re-line 22LR barrels (liner extra).....$175.00-$200

Re-line centerfire barrels (liner extra)

     (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style (parts

     extra).....$95.00

Rem. 700 BDL to detachable magazine style (parts

     extra).....$65.00

Rem. 742 conversion to pump action (includes

     exchange of parts, converts butt stock and

     forearm to black synthetic).....$289.00

     742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld-on

      new,improved style) MUST SEND COMPLETE

      GUN!.....$175.00

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers, tune..$55

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra

     $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need complete

     gun).....$120.00

Suppressor install on AR-15 type gun (need barrel

     only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob

     extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only)..$45-$75

Trigger job, 3-4 #.........$60.00

 

 

AR assemble parts/test....$50.00-100.00

AR inspect and accuracy test...$50-$100

AR pin and weld flash hider/brake....$50.00

Bend bolt/weld-on bolt.......$75.00-$150.00

Bore-sight.............$5.00

Caliber stamping on barrel.....$40.00

Chamber cast (you keep cast).....$45.00

Clean, oil and inspect bolt actions .....$45.00

Clean, oil and inspect levers, pumps, autos.....

     $55.00--75.00

Convert action to magnum capacity.....$85.00

Crossbolt installation for magnums (per

     bolt)......$95 (parts extra)

Cryo-treat barrels..........$150.00

Cut/Crown barrel---bolt action.....$50.00

Cut/Crown barrel---non-bolt action.....$75.00

Dovetail 3/8” groove on 22’s.....$60.00

Drill/tap for iron sights (sights extra).....$75

Drill/tap for scope mounts (mount extra).$65

Drill/tap receiver for peep sight (sight

     extra).....$50.00

Drill/tap for side mounts (mount extra)..$75

Drill/tap "hard" receivers for scope mount

     (military)....$75.00

Drill/tap make custom "weaver-style" mount

     (parts extra)...$150.00

Enfield 1917 ear removal/recontour receiver

     top.....$120.00

Enfield 1917 straighten floorplate.....$60.00

Enfield 1917 fill oval hole on receiver top..$40

Fluting barrel (full length) .....$200.00

Fluting barrel, diamond or spiral.....$250.00

Glass bed action & free float barrel on bolt

     action rifle....$150.00

Inlet altered bolt handle to receiver.....$15.00

Inlet altered bolt handle to stock.....$15.00

Jewel (engine turn) bolt and follower.....$55

Low-scope installation bolt alter.....$60.00

Low-scope safety installation (labor only).$50

M1 Garand steel bedding.....$150.00

Mauser receiver bridge, modify to FN

     contour.....$45.00

Muzzle Brakes...Muzzle Brake Page

Muzzleloader convert to “Quick-Load”

     system.....$40.00

Pillar type glass bedding, free-float action

     (using aluminum pillars, not epoxy)..$175

Porting barrel on magnum rifles.....$135.00

Rebarreling...POR   Custom Barrel Page

Re-line 22LR barrels (liner extra)...$175-$200

Re-line centerfire barrels (liner extra)

     (25/20,32/20,38/40,44/40).....$400-600

Rem. 700 ADL to detachable magazine style

     (parts extra).....$95.00

Rem. 700 BDL to detachable magazine style

     (parts extra).....$65.00

Rem. 742 conversion to pump action (includes

    exchange of parts, converts butt stock and

    forearm to black synthetic).....$289.00

    742 Pump Conversion Technical Info

Rem. 788 bolt handle repair (weld-on

     new,improved style) MUST SEND COMPLETE

     GUN!.....$175.00

Remove slack from military triggers.....$55.00

Remove slack from commercial triggers and

     tune.....$55.00

Remove military sights from rifle.....$40.00

Sako-type extractor conversion (parts extra

     $39.99).....$130.00

Sight-in, iron sights (ammo extra).....$50.00

Sight-in, scoped (ammo extra).........$40.00

Suppressor install, non AR-type (need

     complete gun).....$120.00

Suppressor install on AR-15 type gun (need

     barrel only).....$90.00

Swivel set installation (swivels extra).....$20.00

Tactical bolt knob installation (bolt knob

     extra).......$60.00

Tang sight installation (sight extra).....$50.00

Timney trigger installation (labor only).$45-$75

Trigger job, 3-4 #.........$60.00